Description
The cubicle shower has a stainless steel hollow section frame enclosed in GRP sheeting. The sheeting is fitted with pictogram signs to International Standard ISO 3864-1 and green and white safety stripes. The shower has stainless steel pipework and is lever operated for ease of use in an emergency. It has a removable self-draining ABS shower rose, which is specifically designed for high flow rates in line with ANSI standards. A covered bowl eyewash is located under the shower.
– The shower head is stainless steel , used for washing the body
– For the eyes, face, neck and arms and other parts, the sprayer head with foaming device, water is soft,in the middle of the two nozzles is provided with a flow control valve, self adjusting.
– The central posterior wall is provided with a water inlet G1¼”; collecting tank is provided below, at the bottom of the box is provided with a G1¼” outlet, prevent sewage outflow eyewash and shower
– For the eyes, face, neck and arms and other parts, the sprayer head with foaming device, water is soft,in the middle of the two nozzles is provided with a flow control valve, self adjusting.
– The central posterior wall is provided with a water inlet G1¼”; collecting tank is provided below, at the bottom of the box is provided with a G1¼” outlet, prevent sewage outflow eyewash and shower
– A flow rate of 1 to 12 gpm (3.8 to 45.4 L) for better temperature control across the operating range
– superior design and technology provide a complete safety solution for increased victim comfort.
– Lowest internal pressure drop for this class of valve (advantage where supply pressure is low)
– Wax based thermostat technology for fast response time with proven highly reliable temperature control
– Highest Cold Water Bypass flow rate in the industry (83% of rated tepid flow rate)
– Modular low-lead brass design with internal check stops
– Oversized valve seats resist failures caused by foreign matter
– A new and efficient shuttle design eliminates valve binding
– A custom funnel design improves temperature control at low flow rates
– Outlet temperature is factory set to 85 F (29 C)
– Tempered water: High temperature limit is factory set to 87 F (30 C)
– Cold water by-pass valves are closed during normal operation, regardless of flow rate
– superior design and technology provide a complete safety solution for increased victim comfort.
– Lowest internal pressure drop for this class of valve (advantage where supply pressure is low)
– Wax based thermostat technology for fast response time with proven highly reliable temperature control
– Highest Cold Water Bypass flow rate in the industry (83% of rated tepid flow rate)
– Modular low-lead brass design with internal check stops
– Oversized valve seats resist failures caused by foreign matter
– A new and efficient shuttle design eliminates valve binding
– A custom funnel design improves temperature control at low flow rates
– Outlet temperature is factory set to 85 F (29 C)
– Tempered water: High temperature limit is factory set to 87 F (30 C)
– Cold water by-pass valves are closed during normal operation, regardless of flow rate
ADDITIONAL INFORMATION
Weight | 120 kg |
---|---|
Dimensions | 114 x 110 x 240 cm |
Certifcation | ANSI, CCC, CE, ROHS, ISO9001 |
Finish | Epoxy Coating, Gloss exquisite polished |
Installation | Floor Mounted |
Active Operation | Foot Push, Push Handle, Swing Activation |
Categories | Emergency Eyewash and Shower |
Material | Stainless steel |
Color | Gloss exquisite polished, Options |
Additional information
Weight | 120 kg |
---|---|
Dimensions | 114 × 110 × 240 cm |
Certifcation | |
Finish | |
Installation | |
Active Operation | |
Categories | |
Material | |
Color |