Plastic Corrosion Resistant Laboratory Fan MPCF-300 (LX-300)

Description

PLASTIC CORROSION RESISTANT CENTRIFUGAL FAN FOR LABORATORY FUME HOOD
Plastic corrosion resistant centrifugal fan is particularly designed for conveying corrosive vapours and smokes,
also with high humidity level and with maximum emperature of 60℃.
Suitable for applications where the extraction of corrosive fumes and gases: Sulphuric acid, Sulphurous acid, Nitric acid, Nitrous acid, Hydrofluoric Acid, Boris Acid, Hydrocyanic Acid, Hydrochloric acid. Ammonia, Soda, Ethanol, Potassium hydroxide, Methanol, Propane, Formol, Benzene, Formaldehyde.
Fan series of plastic corrosion resistant centrifugal fan with backward curved impeller provide good characteristics of low noise and high efficiency, which often are applied in laboratory, fume hood, fume cupboard, chemical storehouse, electroplating factory, medicine factory, muould factory, Electronic workshop and metallurgy for exhaust ventilation.
Designed to exhaust fumes from highly corrosive environments such as laboratory fume cupboards, battery rooms, chemical plants, etc. The all polypropylene construction and thick walls ensure maximum protection against acids and corrosion. 50 to 15000 m3/H and 10 to 1 800 Pa of total pressure.

	Housings : PP – Single block strong high density UV treated and recyclable polypropylene (PPH) with no welded joint. Reversible and rotable to any the 8 standard discharge positions by 45° increments. All fan mounting hardware in stainless steel. Inlet / outlet are round with standard size: 160, 200, 250, 300, which are good for plastic duct connection.
	Wheels : PP – Forward curved centrifugal type impeller made, of injection molded PPH. Fan wheel supplied with hub cap constructed of PPH. Wheels electronically and dynamically balanced to ISO 1940.
	Motors – Direct drive: asynchronous, single or three phase, IP55. Single speed: three phase 230/400 V-50/60Hz, single phase 230V-50Hz. Explosion proof motors available on request. Motor is outside the airstream. Three phase motors speed adjustable by variable frequency inverter drive.
	Motor Support: Several options: metal stand constructed of epoxy coated sheet metal(1), polypropylene motor pedestal(2) or roof unit kit(3).
	ATEX – Fans are also available in ATEX Zone II, known outside Europe as explosion proof, category 3 G execution in accordance with ATEX directive 94/9/CE. The performances curves of explosion proof fans are identical with the ones of the standard version.
	Performance – Fan performance based on tests conducted in accordance with AMCA 210-85 and ISO 5801. Certificate: CCC, CE, ROHS, ISO9001
	Warranty – Warrants its equipment to be free from defects in workmanship and material under normal use and service for two years after shipment. Warranty is void if damage results from improper wiring or installation